KEYENCE XG-8000 Series - Manual

1
Multi Camera High Performance Machine
Vision System
XG-8000 Series
Controller Instruction Manual
Read this manual thoroughly before using the XG-8000 Series.
Always keep this manual in a safe place for future reference.
This manual describes the hardware information. Read this manual
thoroughly to understand the performance and functions of the “Multi
Camera High Performance Machine Vision System XG-8000 Series”
in order to maximize the performance of the system.
• This manual covers the XG-8000 Series. All references, unless
otherwise noted, pertain to the XG-8000(P)/8002(P)/8500(P)/
8502(P)/8700(P)/8702(P)/8800(P)/8802(P)/8500L(P)/8502L(P)/
8700L(P)/8702L(P)/8800L(P)/8802L(P). Except when indicated
otherwise, the explanations will use the XG-8700 as the standard.
For more details on the differences between the models, see
“Main Specifications” (page 9).
• Always keep this manual in a safe place for future reference.
• Ensure that the manual is passed to the end user in case of
transfer of the unit.
Trademarks
• “SD Memory Card” is a registered trademark of the SD
association.
• Other company names and product names are registered
trademarks or trademarks of their respective companies.The TM
mark and ® mark are omitted in this manual.
Concerning the Library and Program
libjpeg
Copyright ©1991-2010, Thomas G. Lane.
This software is based in part on the work of the Independent JPEG
Group.
The equipment and accessories listed below are included in the
package when shipped. Upon opening the carton, check that you
have received all of the equipment and accessories listed below.
Standard Package
• Controller Unit x 1
(XG-8000(P)/8002(P)/8500(P)/8502(P)/
8700(P)/8702(P)/8800(P)/8802(P)/
8500L(P)/8502L(P)/8700L(P)/8702L(P)/
8800L(P)/8802L(P), whichever is
appropriate)
• SD card
(XG-8000(P)/8002(P)/8500(P)/8502(P)/
8500L(P)/8502L(P): OP-87133(512MB),
XG-8700(P)/8702(P)/8800(P)/8802(P)/
8700L(P)/8702L(P)/8800L(P)/8802L(P):
CA-SD1G (1GB)) x 1
(already installed in the SD card slot (lower) of the controller)
• Controller instruction manual (This manual: one part Japanese,
one part English)
• Terminal block sticker package x 1
• Ferrite core for RS-422 use x 1 (only for the XG-8500L(P)/
8502L(P)/8700L(P)/8702L(P)/8800L(P)/8802L(P))
Introduction
Package Contents
96M13087