KEYENCE SL-V Series User Manual
Sl-c/sl-v series, Installation procedure of front protection cover, Installation procedure of dimmer filter
SL-C/SL-V Series
Installation Procedure of Front Protection
Cover and Dimmer Filter
Installation Procedure of Front Protection Cover
1
Hook the claw on one side of the front protection cover onto the
groove on the side of the SL-C/SL-V series as shown, then push the
claw on the other side onto the groove.
2
Adjust the position of the front protection cover so that its end
surface is level and at the same height as that of the end surface
of the SL-C/SL-V series.
To use the E-to-E mounting bracket (OP-42370) or the compact
E-to-E mounting bracket (OP-83181), install the SL-C/SL-V
series by using the mounting bracket first, then install the front
protection cover. These mounting brackets cannot be installed
in the SL-C/SL-V series after the front protection cover has
already been installed.
Installation Procedure of Dimmer Filter
1
Install the dimmer filter in the front protection cover by sliding it as
shown in the illustration below.
• A maximum of two dimmer filters can be installed on a single
front protection cover.
• To install the two dimmer filters, either install them after
stacking them or install one dimmer filter after another.
2
Press both ends of the dimmer filter toward the front protection
cover, and confirm that the dimmer filter fits into the front
protection cover securely.
Operating distance
* A maximum of two front protection covers can be installed: one for the
transmitter and the other for the receiver. A maximum of two dimmer filters
can be installed on a single front protection cover.
Dimensions for installation of SL-C/SL-V series
* Front protection cover must be installed to the suitable model of SL-V/SL-C
series according to the above table. (Ex. for SL-V08H, OP-51454 must be
installed.)
* One package of front protection cover contains one unit of front protection
cover. Two units of front protection cover are required to install the front
protection cover on both the transmitter and receiver.
* One package of dimmer filter contains one unit of dimmer filter.
SL-C/SL-V series
Front protection cover
SL-C/SL-V Series
Cross section view
Claws
Front protection cover
SL-C/SL-V series
Align this surface.
Front protection cover
Note
Front protection cover
Dimmer filter
(1)
(2)
Insert the dimmer filter
so that the protrusion (1)
on the front protection
cover and the notch (2)
on the dimmer filter face
in the same direction. If
they are installed facing
different directions, the
display indicators of the
SL-C/SL-V series will be
obscured by the dimmer
filter.
Note
Correct
Incorrect
Incorrect
Number of front
protection covers
used
Number of
dimmer filters
used
SL-VH/VL series
Operating distance(m)
SL-CH/CL series
Operating
distance(m)
SL-CF series
Operating
distance(m)
Total
length
1270 mm
or less
Total
length
1430 mm
or more
1
0
8.5
6.4
8.5
6.4
1
6.5
4.7
6.5
4.7
2
5
3.5
5
3.5
2
0
8
5.8
8
5.8
1
6
4.3
6
4.3
2
4.5
3.2
4.5
3.2
3
3.5
2.4
3.5
2.4
4
2.5
1.8
2.5
1.8
Mounting model
Model of front
protection cover
Model of
dimmer filter
A (mm)
SL-V series
SL-C series
SL-V08H
SL-V04L
SL-C08H
OP-51454
OP-51469
150.3
SL-V12H
SL-V06L
SL-C12H
OP-51455
–
230.3
SL-V16H
SL-V08L
SL-C16H
SL-C08L
OP-51456
OP-51470
310.3
SL-V20H
SL-V10L
SL-C20H
SL-C10L
OP-51457
–
390.3
SL-V24H
SL-V12L
SL-C24H
SL-C12L
OP-51458
OP-51471
470.3
SL-V28H
SL-V14L
SL-C28H
SL-C14L
OP-51459
–
550.3
SL-V32H
SL-V16L
SL-C32H
SL-C16L
OP-51460
OP-51472
630.3
SL-V36H
SL-V18L
SL-C36H
SL-C18L
OP-51461
–
710.3
SL-V40H
SL-V20L
SL-C40H
SL-C20L
OP-51462
–
790.3
SL-V44H
SL-V22L
SL-C44H
SL-C22L
OP-51463
–
870.3
SL-V48H
SL-V24L
SL-C48H
SL-C24L
OP-51464
OP-51473
950.3
SL-V52H
SL-V26L
SL-C52H
SL-C26L
OP-51465
–
1030.3
SL-V56H
SL-V28L
SL-C56H
SL-C28L
OP-51466
–
1110.3
SL-V60H
SL-V30L
SL-C60H
SL-C30L
OP-51467
–
1190.3
SL-V64H
SL-V32L
SL-C64H
SL-C32L
OP-51468
OP-51474
1270.3
SL-V72H
SL-V36L
–
–
OP-83198
–
1430.2
SL-V80H
SL-V40L
–
–
OP-83200
–
1590.2
SL-V88H
SL-V44L
–
–
OP-83202
–
1750.2
SL-V96H
SL-V48L
–
–
OP-83204
–
1910.2
SL-V104H
SL-V52L
–
–
OP-83206
–
2070.2
SL-V112H
SL-V56L
–
–
OP-83208
–
2230.2
SL-V120H
SL-V60L
–
–
OP-83210
–
2390.2
Mounting
model
Model of front
protection cover
A (mm)
SL-C16F
OP-66800
160.3
SL-C24F
OP-66801
240.3
SL-C32F
OP-66802
320.3
SL-C40F
OP-66803
400.3
SL-C48F
OP-66804
480.3
SL-C56F
OP-66805
560.3
SL-C64F
OP-66806
640.3
SL-C72F
OP-66807
720.3
SL-C80F
OP-66808
800.3
SL-C88F
OP-66809
880.3
SL-C96F
OP-66810
960.3
SL-C104F
OP-66811
1040.3
SL-C112F
OP-66812
1120.3
SL-C120F
OP-66813
1200.3
SL-C128F
OP-66814
1280.3
29.2
33.2
(33)
A
96M11244
2010
11244E 1040-1 96M11244