KEYENCE SL-V Series - Manual (Page 79)

3-1 Correct Installation Method
3-3
In
st
allatio
n
to a Mac
h
ine
3
SL-V-M-NO3-E
Correct position
• The machine operators are able to approach the hazardous zone or hazards only passing through the
detection zone of the SL-V.
• While the machine is running, the machine operator must always stay on the opposite side of the haz-
ardous zone or hazard.
Incorrect position
• The machine operator can access the hazardous zone or hazards without passing through the detec-
tion zone of the SL-V.
• While the machine is running, the machine operator or a part of machine operator‘s body can stay at
the position between the detection zone of the SL-V and hazardous zone or hazard.
Additional protective measures, such as a mechanical safety guard, must be installed to
protect areas not covered by the SL-V. NEVER install the SL-V in a manner which allows an
operator to position his body or part of his body between the SL-V and the hazardous zone,
without first passing through the plane of the SL-V. Failure to do so can result in serious
bodily injury or death.
Mounting position
Safe Safe
Additional protective measures
Dangerous Dangerous Dangerous
Danger