KEYENCE SL-V Series - Manual (Page 45)

2-8 State Information Output
2-21
Fu
nct
ion
s and
Feat
ures
2
SL-V-M-NO2-E

Example when going into a lockout condition from a muted condition
• When using a PNP output type cable to connect to a PNP input device
• When using an NPN output type cable to connect to an NPN input device
• When using a PNP output type cable to connect to an NPN input device
• When using an NPN output type cable to connect to a PNP input device
If there are two or more causes for a lockout condition, the SL-V outputs the pulse representing the first
cause of lockout condition.
If the SL-V still has another cause of lockout even after removing the first, the SL-V outputs the pulse
string representing the cause of the secondary problem detected by the SL-V.
AUX
2 pulses (muting function active) Pulses according to cause
SL-V goes to lockout condition
Muted condition
40 ms min. 120ms
120 ms min.
50 ms max.
20ms* 20ms*
20ms* 20ms*
ON
OFF
State information
output 1
ON
OFF
State information
output 2
ON
OFF
ON
OFF
OSSD
* This is 100 ms when the
"Pulse speed" on the
SL-VH1S is set to "Slow".
AUX
Pulses according to cause
SL-V goes to lockout condition
Muted condition
40 ms min. 120ms
120 ms min.
50 ms max.
20ms* 20ms*
20ms* 20ms*
ON
OFF
State information
output 1
ON
OFF
State information
output 2
ON
OFF
ON
OFF
OSSD
* This is 100 ms when the
"Pulse speed" on the
SL-VH1S is set to "Slow".
NOTE
Cable
Self-diagnosis
Series Connection
Interlock
AUX
EDM
Wait
State Information
Alert
Clear/Blocked
Suspension
Fixed
Reduced
Monitoring