Changing configuration of the muting function, Changing configuration of the muting function -33, Danger – KEYENCE SL-V Series User Manual
Page 57: Procedure for configuration through the sl-vh1s
2-11
Temporary Suspension of Safety Function
2-33
2
SL-V-M-NO2-E
The conditions related to muting can be changed through the special procedure on the SL-V or through
the SL-VH1S.
(X: available -: not available)
If you choose these options according to your machine application, password setting and/or password
input is required as a special procedure.
The password can be set on the SL-V main unit or through the configuration software SL-VH1S.
The users who intend to use these options mentioned above from 1 to 3, 5 and 6 have to
perform the risk assessment based on their machine application.
• Muted condition is terminated approx. 5 minutes later when the time between muting inputs exceeds 3
seconds, even if "Not specified" is selected for both maximum muting period of time and time between
muting inputs.
• Password must be secured because the password is necessary to change the condition for initiation
and/or termination of muting or change these conditions back to the default.
The override conditions cannot be changed.
See "Override function" (page 2-45)
Procedure for configuration through the SL-VH1S
Refer to "SL-VH1S User’s Manual".
Changing configuration of the muting function
Item
option
availability
SL-V
SL-VH1S
Changing of the
conditions for initiation
of muting
1. Time period specification of muting inputs
Time period specification of 0.04s to 3s between
muting input 1 and muting input 2 can be changed.
The lower limit of 0.04s cannot be changed.
1 second
-
X
3 seconds (default)
X
X
10 second
-
X
30 second
-
X
Not specified
X
X
2. Sequence specification of muting inputs
Sequence specification of muting inputs can be
changed. (Default sequence: muting input 1 is first,
muting input 2 is second.)
1 -> 2 fixed (default)
X
X
Not specified
X
X
Conditions for
termination of muting
3. Maximum muting period
Maximum muting period of approx. 5 minutes can be
changed.
1 minute
-
X
5 minutes (default)
X
X
10 minutes
-
X
20 minutes
-
X
Not specified
X
X
4. Muting lamp error
Sets whether the SL-V goes to the lockout condition when there is a muting
lamp error.
Only warning (default)
X
X
Lockout
X
X
5. Muting area configuration
-
-
X
6. Muting bank function
Not apply (default)
X
X
Apply
-
X
Danger
NOTE
Reference
Cable
Self-diagnosis
Series Connection
Interlock
AUX
EDM
Wait
State Information
Alert
Clear/Blocked
Suspension
Fixed
Reduced
Monitoring