Arc Machines 307 User Manual

Page 4

Arc Machines, Inc. Model 307 Orbital Welder Training

Document No. 740096 i.
Rev. A

REV

DCO#

CHANGE DESCRIPTION

DATE

APR

Model 307 Operator Training Guidelines

Notice

This document and the information contained herein is the property of Arc

Machines, Inc. It is proprietary and submitted and received in confidence. It

shall be used only for the purpose for which it is submitted and shall not be

copied in whole or in part without the prior express written permission of Arc

Machines, Inc.

The information in this document has been carefully reviewed and is believed

to be accurate. However, no responsibility is assumed for inaccuracies.

Information and instructions in this document are subject to change and Arc

Machines, Inc. reserves the right to change specifications and data without

notice.

WARNING!

The nature of the GTAW process creates some POTENTIAL HAZARDS. In

accordance with international safety regulations the EXCLAMATION SYMBOL

indicates that this equipment is considered HAZARDOUS until an operator has

been made aware of these POTENTIAL HAZARDS by READING THIS MAN-

UAL. The LIGHTNING FLASH SYMBOL indicates that there are potential elec-

trical hazards. The use and display of these symbols make it the OPERATOR’S

RESPONSIBILITY TO INSURE THAT HE HAS READ AND/OR BEEN MADE

AWARE OF ALL SAFETY-RELATED ITEMS CONTAINED IN THIS MANUAL.

Publication date: First Edition - September 2004

A 5917 Correct output tolerance on pg 36 3/24/11 D.C.