Arc Machines 307 - Manual (Page 178)

Arc Machines, Inc. Model 307 Orbital Tube Welder Training
Document No. 740096 Chapter 18. Page 11.
Rev. A
Weld Head Wizard
The Weld Head Wizard allows the user to specify or modify factors which
affect the operation of the new weld head. These include ground fault
enabled or disabled, electrode and tube diameters, rotor diameter, gas flow
rates and purge times, size range of tubing and/or pipe that the head can
accommodate, the amperage at which coolant may be required, and weld
head position enabled for weld heads with encoders.
Weld head notes
Weld head notes provides a screen on which the user can write information
about the weld head. This information is stored with other information
pertaining to the weld head.