Brocade Communications Systems RFS6000 - Manual (Page 99)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 97
53-1001931-01
show
2
smtp-notification
Common to all modes
Displays the set smtp-notification parameters
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
show smtp-notification traps
Parameters
Example
RFController(config)#show smtp-notification traps
------------------------------------------------------------------Gl
obal enable flag for Trap SMTP-Notification Disabled
------------------------------------------------------------------En
able flag status for Individual Trap SMTP-Notification
-------------------------------------------------------------------M
odule Type Trap Type Enabled?[Y/N]
-------------------------------------------------------------------s
nmp coldstart N
snmp linkdown N
snmp linkup N
snmp authenticationFail N
nsm dhcpIPChanged N
diagnostics tempHigh N
diagnostics tempOver N
diagnostics fanSpeedLow N
diagnostics cpuLoad1Min N
diagnostics cpuLoad5Min N
diagnostics cpuLoad15Min N
diagnostics usedKernelBuffer N
diagnostics ramFree N
diagnostics processMemoryUsage N
diagnostics packetBuffers N
diagnostics ipRouteCache N
diagnostics fileDescriptors N
redundancy memberUp N
redundancy memberDown N
redundancy memberMisConfigured N
redundancy adoptionExceeded N
redundancy grpAuthLevelChanged N
redundancy resourceUp N
traps Displays trap enable flags