Brocade Communications Systems RFS6000 - Manual (Page 755)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 753
53-1001931-01
Chapter
24
SOLE Instance
In this chapter
• SOLE config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 753
Use the
(config-rtls-sole)
instance to configure SOLE Location Engine related parameters.
To navigate to this instance, use the commands
RFController(config)#rtls
RFController(config-rtls)#sole
RFController(config-rtls-sole)#
SOLE config commands
Table 26 summarizes
config-rtls-sole
commands:
TABLE 26 Location Engine Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 754
end Ends the current mode and moves to EXEC mode page 755
exit Ends current mode and moves to the previous mode page 756
help Description of the interactive help system page 757
locate Configures location commands page 758
no Negates a command or set its defaults page 759
redundancy Enables redundancy support across cluster members for
SOLE page 760
service Invokes service commands to troubleshoot or debug
(config-rtls) instance configurations
page 761
show Displays the running system information page 762
rssi-filter Filters rssi value in dbm page 764
aap-rssi-updat
e-interval Displays AAP probe packet interval value in seconds page 765
wireless-client Displays wireless-client configurations page 766