Brocade Communications Systems RFS6000 - Manual (Page 618)

616 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
cluster-master-support
Wireless configuration commands
Sets the parameters for cluster master support
This is required for cluster level functions.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
cluster-master-support enable
Parameters
Usage Guidelines
Use the
{no} cluster-master-support enable
command to disable this feature. By default, it
is disabled.
Example
RFController(config-wireless)#cluster-master-support enable
RFController(config-wireless)#
enable Enables the cluster master support. This is required for cluster
level functions.