Brocade Communications Systems RFS6000 - Manual (Page 604)

602 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
ap-containment
Wireless configuration commands
Sets the rogue AP containment parameters
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
ap-containment [add |enable|interval )
Parameters
Example
RFController(config-wireless)#ap-containment enable
RFController(config-wireless)#ap-containment interval 300
RFController(config-wireless)#ap-containment add 00-15-70-37-fa-be
RFController(config-wireless)#
NOTE
The effective ap -containment interval for APs is 200ms which is channel dwell time. This remains
same even if it configured to a lower value. For single-scan-APs, the smaller values of containment
will be effective.
add Adds an AP’s MAC Address into the rogue AP containment
list.
enable Enables the Rogue AP Containment feature.
interval Sets the time , a value in the rage of 20-5000, between
two Rogue AP containment processes. Time duration is in
milliseconds.