Brocade Communications Systems RFS6000 - Manual (Page 434)

432 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Interface config commands
12
storm-control
Interface config commands
Sets storm-control for broadcasting
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
storm-control [bcast|mcast|ucast] rate-limit <1-1000000>
Parameters
Example
RFController(config-if)#storm-control bcast ratelimit 88
RFController(config-if)#
RFController(config-if)#storm-control mcast ratelimit 88
RFController(config-if)#
RFController(config-if)#storm-control ucast ratelimit 88
RFController(config-if)#
bcast rate-limit
<1-1000000> Configures storm-control of broadcast packets.
•
rate-limit <1-1000000> – Performs packet rate limiting
•
<1-1000000> – Displays allowed rate in packets per
second
mcast rate-limit
<1-1000000> Configures storm-control of multicast packets.
•
rate-limit <1-1000000> – Performs packet rate limiting
•
<1-1000000> – Displays allowed rate in packets per
sec ond
ucast rate-limit
<1-1000000> Configures storm-control of unicast packets
•
rate-limit <1-1000000> – Performs packet rate limiting
•
<1-1000000> – Displays allowed rate in packets per
sec ond