Brocade Communications Systems RFS6000 - Manual (Page 804)

802 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Role config commands
26
ap-location
Role config commands
Sets the AP location configuration
• This requires the location engine to be enabled on the controller with a site, appropriate zones
defined and AP co-ordinates defined. The role based firewall has to know which zone the Client
is located when it associates for the ap-parameter option to work.
• The ‘ap-location’ parameter defines the zone or zones you wish to match.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
ap-location [any|contains|exact|not-contains]
ap-location any
ap-location contains
ap-location exact
ap_location not-contains
Parameters
Example
RFController(config-role)#ap-location any
RFController(config-role)#
RFController(config-role)#ap-location contains office
RFController(config-role)#
RFController(config-role)#ap-location exact warehouse
RFController(config-role)#
RFController(config-role)#ap-location not-contains office
RFController(config-role)#
any Defines any AP location.
contains AP location contains the string .
exact AP location contains the exact string
not-contains AP location does not contain the string