Brocade Communications Systems RFS6000 - Manual (Page 115)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 113
53-1001931-01
show
2
wireless-client
{[<1-8192>||associ
ation-history|
association-stats|probe-hist
ory|radio|roaming|statistics
|
voice|wlan]}
Displays the parameters of associated wireless clients. All
parameters are optional.
•
<1-8192> – Index of wireless client
•
– MAC address of wireless client
•
association-history {}– Displays the association history
of the wireless clients with the MAC address and its
configured name.
•
association-stats – Displays Statistics of associations and
reassociations
•
probe-history [<1-200>|config-list] – Displays the probe
history of the wireless client with the address and its
configured name
•
<1-200> – Defines index to display probe-logging
•
config-list – Lists probe history MAC addresses
•
radio <1-4096> – Displays the associated wireless clients for
the radio with the MAC address and its configured name.
•
Mobility RFS7000 Controller supports <1-4096> radios
•
Mobility RFS6000 Controller supports <1-1000> radios
•
roaming database – Displays the local wireless-client
roaming database.
•
statistics [<1-8192>||summary|voice] – Displays
wireless client RF statistics
•
<1-8192> – Displays Index of wireless-client
•
{detail}– Displays MAC address of
wireless-client. Optionally display detailed information.
•
summary – Displays RF-Stats summary of all currently
associated wireless-clients
•
voice [<1-4096>|] – Displays wireless-client
voice statistics for a radio index or radio MAC address.
•
voice – Displays voice call details
•
wlan <1-256> – Displays the Clients associated to the
selected wlan
multicast-packet-limit Displays the multicast-packet-limit
phrase-to-key
[wep128|wep64]
Displays the WEP keys generated by a passphrase
•
wep128 – Displays WEP128 keys
•
wep64 – Displays WEP64 keys
•
– The passphrase to generate the keys for
qos-mapping {[
wired-to-wireless|
wireless-to-wired]} Quality of service mappings used for mapping WMM access
categories and 802.1p/DSCP tags
•
wired-to-wireless – Mappings used when traffic is switched
from the wired to the wireless side
•
wireless-to-wired – Mappings used when traffic is switched
from the wireless to the wired side