Brocade Communications Systems RFS6000 - Manual (Page 406)

404 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Interface config commands
12
no Negates a command or sets its defaults page 417
port-channel Configures the load-balancing criteria of an aggregated port page 418
power PoE (Power Over Ethernet) commands used to configure PoE
power limit and priority for a port page 420
service Invokes service commands to troubleshoot or debug the
(config-if) instance configurations
page 421
show Displays running system information page 422
shutdown Shuts down a selected interface page 424
spanning-tree Disables the selected interface. The interface is
administratively enabled unless explicitly disabled using this
command page 425
speed Specifies the speed of a fast-ethernet (10/100) or a gigabit
ethernet port (10/100/1000) page 428
static-channel-g
roup Configures static channel commands page 429
storm-control Sets broadcast rate-limit value page 432
controllerport Sets controller mode characteristics page 430
tunneling Sets protocol-over protocol tunneling page 433
TABLE 12 Interface Config Commands
Command Description Ref.