beautypg.com

Brocade Communications Systems RFS6000 User Manual

Page 259

background image

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide

257

53-1001931-01

Global Configuration commands

5

Usage Guidelines

1. Use the

no

command along with ip to undo any IP based configuration.

[no] ip(access-list|default-gateway|dos|dhcp|domain-lookup|

domain-name|http|local|name-server|nat|route|routing|ssh|telnet)

2. When using the

ip access-list

parameter, enter the following contexts:

ext-nacl – Extended ACL. For more information, see

Chapter 14, Extended ACL Instance

std-nacl – Standard ACL. For more information, see

Chapter 15, Standard ACL Instance

dhcp – DHCP Server instance. For more information, see

Chapter 17, DHCP Server Instance

tcp -max-incomplete –Configures the maximum half-open
TCP connections in the system

high <1-1000> – Sets the upper threshold value
between 1 and 1000

low <1 - 1000> – Sets the lower threshold value
between 1 and1000

igmp snooping
{[querier|unknown-multicas
t-fwd|vlan]}

Configures IGMP Snooping parameters.

unknown-multicast-fwd – Optional. Forwards packets from
unregistered multicast servers

querier
{[address|max-response-time|query-interval|timer|version]
}}
– Configures IGMP querier. All options are optional

address – Sets GMP querier source IP address

max-response-time <1-25> – Sets IGMP querier
maximum response time in seconds

query-interval <1-18000> – Sets IGMP querier query
interval

timer expiry <60-300> – Sets querier other querier time
out in seconds to a value in the range 60 to 300

version <1-3> – Sets IGMP version

vlan [<1-4094>|]
{mrouter|querier|unknown-multicast-fwd]}

– Identifies the

vlan to use. All options are optional

vlan <1-4094>|] – Sets the vlan to use for
IGMP Snooping

<1-4094> – A single VLAN ID

– A list of VLAN IDs

mrouter [interface |learn pim-dvmrp]
– Sets information for Multicast router

interface – Gigabit Ethernet interfaces
to be configured. can be a single
interface or a list of interfaces

learn pim-dvmrp – The multicast controller
learning protocol using PIM-DVMRP protocol

querier
{[address|max-response-time|query-interval|time
r|version]}} –
Sets IGMP querier for the selected
VLAN interface

unknown-multicast-fwd – Forwards packets from
unregistered multicast servers for this VLAN

This manual is related to the following products: