Brocade Communications Systems RFS6000 - Manual (Page 625)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 623
53-1001931-01
Wireless configuration commands
20
dhcp-one-portal-forward
Wireless configuration commands
Enables the option to forward DHCP responses to one portal when the destination wireless-client is
known from the response content
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
dhcp-one-portal-forward enable
Parameters
Usage Guidelines
Use the
{no} dhcp-one-portal-forward enable
command to disable forwarding DHCP
responses.
Syntax
RFController(config-wireless)#dhcp-one-portal-forward enable
RFController(config-wireless)#
enable Enables the option to forward DHCP responses to one portal when
the destination wireless-client is known from the response
content.