Brocade Communications Systems RFS6000 - Manual (Page 613)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 611
53-1001931-01
Wireless configuration commands
20
broadcast-tx-speed
Wireless configuration commands
Configure the rate at which broadcast and multicast traffic is transmitted between the controller
and wireless client
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
broadcast-tx-speed [range|throughput]
Parameters
Example
RFController(config-wireless)#broadcast-tx-speed range
RFController(config-wireless)#
RFController(config-wireless)#broadcast-tx-speed throughput
RFController(config-wireless)#
range Uses a lowest basic rate, but provides the maximum range
(default)
throughput Uses a highest basic rate, but provides the maximum throughput