Brocade Communications Systems RFS6000 - Manual (Page 627)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 625
53-1001931-01
Wireless configuration commands
20
dot11-shared-key-auth
Wireless configuration commands
Enables support for 802.11 shared key authentication
NOTE
Shared key authentication has known weaknesses that can compromise your WEP key. It should
only be configured to accommodate wireless stations unable to carry out Open-System
authentication.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
dot11-shared-key-auth enable
Parameters
Usage Guidelines
Use the
{no} dot11-shared-key-auth enable
command to disable support for 802.11 shared
key authentication.
Example
RFController(config-wireless)#dot11-shared-key-auth enable
RFController(config-wireless)#
enable Enables support for shared key authentication