Brocade Communications Systems RFS6000 - Manual (Page 776)

774 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
extensive-scan
smart-rf config commands
Enters the extensive scan mode
The device needs calibration at every
tx-power
level.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
extensive-scan enable
Parameters
Example
RFController(config-wireless-smart-rf)#extensive-scan enable
RFController(config-wireless-smart-rf)#
extensive enable Enables the extensive scan mode.