Brocade Communications Systems RFS6000 - Manual (Page 262)

260 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
line
Global Configuration commands
Configures the terminal line
Opens the config-line mode, where you can configure the various parameters for the selected
terminal.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
line [console|vty]
line console <0-0>
line vty <0-871> {<0-871>}
Parameters
Example
RFController(config)# line console 0
RFController(config)# line vty 0
RFController(config)# line vty 0 871
RFController(config)#
line console <0-0> Set the primary terminal line to 0
line vty <0-871>
{<0-871>} Sets the virtual terminal line to a value between 0 and 871.
Optionally the last line number can also be set to a value between
0 and 871