Brocade Communications Systems RFS6000 - Manual (Page 597)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 595
53-1001931-01
Wireless configuration commands
20
adopt-unconf-radio
Wireless configuration commands
Adopts a radio (even if not yet configured). Default templates are used for configuring the adopted
radio
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
adopt-unconf-radio enable
Parameters
None
Usage Guidelines
Use the {
no} adopt-unconf-radio
command to switch off adopting unconfigured radios.
Example
RFController(config-wireless)#adopt-unconf-radio enable
RFController(config-wireless)#