Brocade Communications Systems RFS6000 - Manual (Page 749)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 747
53-1001931-01
RFID config commands
23
Parameters
Usage Guidelines
Use
[no] reader [|][options]
to rollback any configurations performed using
the
reader
command
Example
RFController(config-rtls-rfid)#reader 1 antenna 1 coordinates x 400 y 400 z
500
RFController(config-rtls-rfid)#
reader [|
] Enter a single RFID reader index or a list (1,3,7) or
range ( 3-7) of RFID reader indices
antenna
[|]
coordinates x
y
z
Configures the RFID readers antenna. Select a antenna using its
index, between <1-8> or range (eg:3-7) of antenna indices or any
RFID reader antenna
•
coordinates - Sets the coordinates for the antenna
•
x – Configures the x coordinate for the
antenna for the RFID reader.
•
y – Configures the y coordinate for the
antenna for the RFID reader.
•
z – Configures the z coordinate for the
antenna for the RFID reader.
reader [|
] antenna
[|
] power
Configures the RFID reader power.
•
power – Sets the power
•
– Sets the antenna power to between
<-63 and 63 dBm.
reader id Sets the IP address for the reader with index .
reader coordinates
x
y
z Sets the coordinates for the RFID reader.
•
coordinates - Sets the coordinates for the reader
•
x – Configures the x coordinate for the RFID
reader.
•
y – Configures the y coordinate for the RFID
reader.
•
z – Configures the z coordinate for the RFID
reader.
reader
[|>] description Sets the description of a RFID reader or a list of readers to
(1-32 characters).
reader
[|>] enable Enables or connects the RFID reader with the index or a
list of RFID readers .
reader
[|>] name Sets a user friendly name to a RFID reader or a group of RFID
readers to (1-20 characters).