Brocade Communications Systems RFS6000 - Manual (Page 327)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 325
53-1001931-01
Global Configuration commands
5
whitelist
Global Configuration commands
White list is a list of host names and IP addresses that are permitted access by default.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
NOTE
whitelist command instantiates (config-whitelist) instance. The prompt changes from
RFController
(config)#
to
RFController (config-whitelist)
Syntax
whitelist [clrscr|end|exit|help|no|permit|show|service]
whitelist no permit
whitelist permit [|]
Parameters
Example
RFController(config-whitelist)#permit 172.16.10.3
RFController(config-whitelist)#permit brocade suffix
RFController(config-whitelist)#
clrscr Clears the display screen.
end Ends the current mode and changes to EXEC mode.
exit Ends the current mode and changes to previous mode.
help Displays the interactive help system.
no Negates a command or sets its defaults.
[|Hostname
] Permits list of hostnames and IP addresses.
– Displays IP address
suffix – Displays hostname
suffix – Matches any hostname including this one as suffix