Brocade Communications Systems RFS6000 - Manual (Page 557)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 555
53-1001931-01
Chapter
19
Radius Server Instance
In this chapter
• Radius configuration commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555
Use the
(config-radsrv)
instance to configure local RADIUS server parameters. Local
(Onboard) RADIUS server commands are listed under this mode. To navigate to this instance, use
the command:
RFController(config)#radius-server local
RFController(config-radsrv)#
Radius configuration commands
Table 20 summarizes the Radius server configuration command:
TABLE 20 RADIUS Server Command Summary
Command Description Ref.
authentication Configures the authentication scheme used with the RADIUS
server page 557
ca Defines CA parameters page 558
clrscr Clears the display screen page 559
crl-check Enables a Certificate Revocation List (CRL) check page 560
end Ends the current mode and moves to the EXEC mode page 561
exit Ends the current mode and moves to the previous mode page 562
group Sets RADIUS user group parameters.
NOTE: This command navigates to another sub-instance
called config-radsrv-group with its own
command summary. v
page 563
help Displays the interactive help system page 573
ldap-server Sets LDAP server parameters page 574
nas Sets RADIUS client parameters page 577
no Negates a command or sets its defaults page 578
proxy Defines the RADIUS proxy server configuration page 579
rad-user Sets the RADIUS user configuration page 580
server Configures server certificate parameters page 583
service Invokes service commands to troubleshoot or debug
(config-radsrv) instance configurations
page 584