Brocade Communications Systems RFS6000 - Manual (Page 177)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 175
53-1001931-01
Priv Exec command
4
change-passwd
Priv Exec command
Changes the password of a logged user
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
change-passwd
Parameters
None
Usage Guidelines
A password must be between 8 to 32 characters in length. For security, the console does not
display user entered key words or the old password and new password fields.
Verify the console displays a “password successfully changed” message.
NOTE
The console (by default), does not display a user entered keyword for an old password and new
password. Leaving the old password and new password fields empty displays the following error
message:
Error: Invalid password length. It should be between 8 - 32characters.
Example
RFController#change-passwd
Enter old password:
Enter new password:
Password for user 'admin' changed successfully
RFController#