Brocade Communications Systems RFS6000 - Manual (Page 435)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 433
53-1001931-01
Interface config commands
12
tunneling
Interface config commands
Sets protocol-over protocol tunneling.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
tunnel [destination |source |ttls <1-255>]
Parameters
Example
RFController(config-if)#tunnel destination 1.2.6.3
RFController(config-if)#
destination Destination of the tunnel packet.
•
– Specifies the IP address of the destination.
source Source of tunnel packets.
•
– Specifies the IP address of the source.
ttl<1-255> Sets time to live.