Brocade Communications Systems RFS6000 - Manual (Page 287)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 285
53-1001931-01
Global Configuration commands
5
deniedAssociationOnRates|deniedAssociationOnShortPream|
deniedAssociationOnSpectrum|deniedAssociationOnSSID|
deniedAuthentication|disassociated|radiusAuthFailed|
tkipCounterMeasures|vlanChanged]}
smtp-notification enable traps wireless wlan
{[vlanUserLimitReached|webPortalUnavailable|
webPortalUnreachable|webPortalUnconnected]}
smtp-notification password 0
smtp-notification port <1-65535>
smtp-notification prefix
smtp-notification recipient <1-4>
smtp-notification sender
smtp-notification smtp-server-address
smtp-notification user
Usage Guidelines
It’s recommended smtp-notification not be enabled for all traps. When smtp-notification is
enabled, an email is sent to the recipients every time a trap is fired. An email is sent for each fired
trap. This could potentially generate large email traffic for the recipients.
Some traps, such as Association, Disassociation, generate a large number of notifications which
are then consolidated and sent as a single email every five (5) minutes.
When smtp-notification is enabled and the sender, recipient, server, and port values are not
configured, then a syslog event “Incomplete Configuration” is fired every five (5) minutes till the
issue is resolved.