Brocade Communications Systems RFS6000 - Manual (Page 695)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 693
53-1001931-01
Wireless configuration commands
20
radius [accounting|
authentication-protocol|
dscp|
dynamic-authorization|
dynamic-vlan-assignment|
mac-auth-format|
wireless-client|
reauth|server] Configures RADIUS parameters for the select WLAN.
•
accounting [mode|server|timeout] – Sets RADIUS
accounting parameters.
•
mode [start-stop|stop-only|start-interim-stop] – Sets
the Accounting Mode.
•
start-stop – Sends accounting start-stop.
•
stop-only – Sends accounting stop-only.
•
start-interim-stop interval <60-3600> – Sets the
time interval between successive accounting
updates to a value in the range 60 to 3600 secs.
•
server [primary|secondary] [ {acct-port }|
radius-key [0 |2 |]] – Sets the
primary or secondary RADIUS server for the selected
WLAN.
•
primary – Sets primary RADIUS server information.
•
secondary – Sets secondary RADIUS server
information.
•
– Sets the IP address of the RADIUS server.
•
acct-port – Sets the optional radius server
accounting port. Default is 1813.
•
radius-key [0 |2 |] – Sets the
radius-key for the RADIUS server.
•
0 – The key is sent unencrypted.
•
2 – The key is sent encrypted with the
password-encryption secret.
•
– The shared key.
•
timeout <1-300> – Sets the time the wireless controller
waits for a response from the RADIUS server before
retrying accounting.
•
<1-300> – The time duration in seconds.