Brocade Communications Systems RFS6000 - Manual (Page 687)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 685
53-1001931-01
Wireless configuration commands
20
authentication-type
[eap|hotspot|kerberos|
mac-auth|none] Sets the authentication type for this WLAN.
•
eap – EAP authentication (802.1X).
•
hotspot – Web based authentication.
•
kerberos – Kerberos authentication (encryption will change
to WEP128 if its not already wep128/keyguard).
•
mac-auth – MAC authentication (RADIUS lookup of MAC
address).
•
none – No authentication is used.
wlan <1-256>
aap-ipfilter-rules [in|out]
{<1-20>|AAP_IPF_RULE} Configures AAP IP Filter rules
•
in - In direction
•
out - Out direction
•
<1-20> - A single index
•
- A list (for example: 1.3.7) or a range
(for example 3-7) of indices
client-bridge-backhaul
enable Enables the client bridge backhaul capability on this wlan.
deny-static-client Drop packets from static clients
description Sets the description for this WLAN. Use to identify the selected
WLAN.
dot11i [handshake | key|
key-rotation |
key-rotation-interval|
opp-pmk-caching |
phrase|pmk-caching |
preauthentication |
second-key|
tkip-cntrmeas-hold-time|
wpa2-tkip] Modifies tkip/ccmp (802.11i) related parameters.
•
handshake timeout <100-5000> retransmit <1-10> – Sets
a handshake for the timeout and retransmission intervals.
•
timeout <100-5000> – Sets the timeout (in
milliseconds) between retries.
•
retransmit <1-10> – Sets the number of retransmission
attempts.
•
key [0 |2 |] –
Configure the key (PMK).
•
0 – Password is specified unencrypted.
•
2 – Password is encrypted with
password-encryption secret.
•
– The 256bit (64 hex characters) long key.
•
key-rotation enable – Controls the periodic update of
broadcast keys for associated wireless clients.
•
key-rotation-interval <30-86400> – Configures the
broadcast key rotation interval in seconds.
•
opp-pmk-caching – Enables the opportunistic use of cached
pairwise master keys (fast roaming with
eap/802.1X).
•
phrase [0 |2 |] –
Configures the passphrase.
•
0 – Password is specified unencrypted.
•
2 – Password is encrypted with
password-encryption secret.
•
– Set a passphrase between 8 and 63
characters.
•
pmk-caching – Enables the use of cached pairwise master
keys (fast roaming with eap/802.1X).
•
preauthentication – Enables support for 802.11i
pre-authentication.