Brocade Communications Systems RFS6000 - Manual (Page 586)

584 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Radius configuration commands
19
service
Radius configuration commands
Invokes the service commands to troubleshoot or debug the
(config-radsrv)
instance
configuration
This command is also used to enable the RADIUS server.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
service show cli
Parameters
None
Example
RFController(config-radsrv)#service show cli
Radius Configuration mode:
+-authentication
+-data-source
+-ldap [authentication data-source (local|ldap)]
+-local [authentication data-source (local|ldap)]
+-eap-auth-type
+-all [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|peap-gt
c|peap-mschapv2|tls|all)]
+-peap-gtc [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|pe
ap-gtc|peap-mschapv2|tls|all)]
+-peap-mschapv2 [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschap
v2|peap-gtc|peap-mschapv2|tls|all)]
+-tls [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|peap-gt
c|peap-mschapv2|tls|all)]
+-ttls-md5 [authentication eap-auth-type
(ttls-md5|ttls-pap|ttls-mschapv2|pe
ap-gtc|peap-mschapv2|tls|all)]
+-ttls-mschapv2 [authentication eap-auth-type (ttls-md5|ttls-