Brocade Communications Systems RFS6000 - Manual (Page 725)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 723
53-1001931-01
RTLS config commands
21
site
RTLS config commands
Configures RTLS site dimensions
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
site [description|dimension|name|scale]
site description
site dimension [unit [feet|meters]|x <1-9000> y <1-9000>
z <0-180>]
site name
site scale [<1-90>|auto]
Parameters
Usage Guidelines
Use
[no] site [description |dimension|name]
to rollback the configurations made using the
site
command
Example
RFController(config-rtls)#site description "Brocade RMZ Ecospace,
India, 5th Floor"
RFController(config-rtls)#
RFController(config-rtls)#site name "BLR-RMZ Ecospace"
RFController(config-rtls)#
description Configures site description
•
– Enter a description for the site
dimension [unit
{feet|meters}|x <1-9000>
y <1-9000> z <0-180>] Configures site dimensions
•
length – Configures site length. Select a value
between <1-9000> if the unit is in feet, and if the unit is in
meters the value will be between <1-3000>
•
width – Configures width of the site. Select a value
between <1-9000> if the unit is in feet, and if the unit is in
meters the value will be between <1-3000>.
•
height – Configures height of the site. Select a value
between <0-180>, if the unit is in feet and if the unit is in
meters the value will be between <0-60>unit – Configures
the distance measurement unit to be used for the site
•
feet – Site distances measured in feet
•
meters – Site distances measured in meters
name Configures name for the site
scale [<1-90>|auto] Configures site scale
•
<1-90> - Configures scale value ranging between 1 - 90
•
auto - Auto configures scale