Brocade Communications Systems RFS6000 - Manual (Page 637)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 635
53-1001931-01
Wireless configuration commands
20
wireless-client
Wireless configuration commands
Configures wireless client related parameters
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
wireless-client [association-history|probe-history]
wireless-client association-history [enable|clear]
wireless-client probe-history [enable|add <1-200> ]
Parameters
Example
RFController(config-wireless)#wireless-client probe-history enable
RFController(config-wireless)#wireless-client association-history enable
RFController(config-wireless)#wireless-client probe-history add 20
AA-BB-CC-DD-EE-FF
RFController(config-wireless)#
association-history
[enable|clear] Enables a wireless client’s association history.
•
enable – Enables a wireless client’s association history.
•
clear – Clears the association history for all wireless clients.
probe-history [enable|add
<1-200> wireless client probe logging configuration commands.
•
enable – Enables a wireless client’s probe logging feature.
•
add <1-200> – Adds a wireless client to probe history
logging.
•
<1-200> – Select an index value between 1 and 200 to
add probe logging MAC.
•
– Sets the MAC address of the mobile used for
probe history logging