Brocade Communications Systems RFS6000 - Manual (Page 626)

624 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
dhcp-sniff-state
Wireless configuration commands
Records wireless client DHCP state information
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
dhcp-sniff-state enable
Parameters
Use the
{no} dhcp-sniff-state enable
command to disable recording wireless client DHCP
state information.
Example
RFController(config-wireless)#dhcp-sniff-state enable
RFController(config-wireless)#
enable Allows support for recording DHCP state information for wireless
clients