Brocade Communications Systems RFS6000 User Manual
Page 220

218
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
Runs commands from the EXEC mode
Ends the current mode and moves to the EXEC mode
Recovers from errors
Ends the current mode and moves to the previous mode
Configures FTP server parameters
Describes the interactive help system
Sets the system's network name
Defines an interface to configure
Internet Protocol (IP)
Sets license management commands
Configures a terminal line
Sets the username and password for local user
authentication
Modifies message logging facilities
Configures MAC access-lists
Configures MAC address table
Sets a name to the MAC address of a Client
Sets properties of the management interface
Negates a command or set its defaults
Configures Network Time Protocol (NTP) parameters
Sets the system prompt
Enters the RADIUS server mode
Sets the rate limit feature parameters
Configures redundancy group parameters
Sets the Role Based Firewall parameters
Configures Real Time Location System parameters
Displays the running system information
Service commands
Modifies SMTP notification parameters
Modifies SNMP engine parameters
Configures spanning tree commands
Configures the timezone
Configures traffic shaping
Establishes user name authentication
Defines the VPN configuration
Configures wireless parameters
TABLE 5
Global Config Commands
Command
Description
Ref.