Brocade Communications Systems RFS6000 - Manual (Page 161)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 159
53-1001931-01
User exec commands
3
cluster-cli
User exec commands
Use this command to enter the cluster-cli context. The cluster-cli context provides centralized
management to configure all cluster members from any one member. Any command executed
under this context will be executed to all the controllers in the cluster.
A new context redundancy supports the cluster-cli. Any commands executed under this context are
executed on all members of the cluster.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
cluster-cli enable
Parameters
Example
RFController> enable
RFController:cluster-cli>
enable Enables the cluster context