Brocade Communications Systems RFS6000 - Manual (Page 751)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 749
53-1001931-01
RFID config commands
23
Parameters
Example
RFController(config-rtls-rfid)#service show cli
RFID readers Config mode:
+-activate [activate]
+-adopt-unconf-readers [adopt-unconf-readers]
+-clrscr [clrscr]
+-do
+-LINE [do LINE]
+-end [end]
+-exit [exit]
+-help [help]
+-no
+-activate [no activate]
+-adopt-unconf-readers [no adopt-unconf-readers]
+-reader
+-<1-48>
+-antenna
+-<1-8>
+-coordinates [no reader (<1-48>|READER) antenna (<1-8>|ANTENNA)
coordinates]
show cli Displays the CLI tree of the current mode
service reader
[|
] antenna
[|a-list>|any] filter
[|r-name>] Displays the RFID reader configuration information.
•
– The RFID reader index.
•
– A list of comma separated RFID reader
indices.
•
antenna [||all] – The
antenna information.
•
– The antenna index in case of
readers with multiple antennae.
•
– The list of comma separated antenna
indices.
•
any – Indicates all antennas.
•
filter [|] – RFID Tag filter
configuration
•
– The index of the Tag Filter.
•
– The name of the Tag Filter.
service reader
[|dex-list>] upgrade ipaddr
ftp-username
ftp-password
ftp-path
username
password
word> Upgrades the RFID readers.
•
– The RFID reader index.
•
– A list of comma separated RFID reader
indices.
•
upgrade ipaddr – Upgrades the selected RFID
reader/readers from the ip address
•
ftp-username – The ftp username for the
upgrade FTP server.
•
ftp-password – The password for the
ftp-username .
•
ftp-path – The path to the upgrade file on the FTP
server.
•
username – The administrative
username on the reader.
•
password – The password for the
username .