Brocade Communications Systems RFS6000 - Manual (Page 324)

322 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
arp
Global Configuration commands
Configures Address Resolution Protocol
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
arp [|ge <1-5>|sa <1-6>|up1|vlan <1-4094|
wwan]{ }
Parameters
Example
RFController(config)# arp ge 2 1.2.3.4 11-22-33-44-55-66
RFController(config)
arp [|ge <1-5>|sa
<1-6>|up1|vlan <1-4094|
wwan] {
} Configures address resolution protocol.
•
– Configures interface name
•
ge <1-5> – Configures Gigabit Ethernet interface
•
sa <1-6> – Configures Static Aggregate interface
•
up1 – Configures WAN interface
•
vlan <1-4094> – Configures vlan
•
wwan – Configures wireless WAN interface
The following parameters are common for all the above.
•
– Displays Internet Protocol
•
– Displays MAC address