Brocade Communications Systems RFS6000 - Manual (Page 792)

790 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
select-channels
smart-rf config commands
Selects a list of channels for Automatic Channel Scan and Smart RF
Use this command to add channels or remove them from the channel list.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
select-channel [|add|remove ]
Parameters
Example
RFController(config-wireless-smart-rf)#select-channels 1,2,15-17
RFController(config-wireless-smart-rf)#select-channels add 1,2,15-17
RFController(config-wireless-smart-rf)#select-channels remove 1,2,15-17
RFController(config-wireless-smart-rf)#
A comma separated list of channel numbers.
add ) Add a channel or a list of channels to the channel list.
remove Remove a channel or a list of channels from the channel list