Brocade Communications Systems RFS6000 - Manual (Page 763)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 761
53-1001931-01
SOLE config commands
24
service
SOLE config commands
Invokes service commands to troubleshoot or debug
(config-rtls)
instance configurations
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
service show cli
Parameters
None
Example
RFController(config-rtls-sole)#service show cli
Location Engine Config mode:
+-clrscr [clrscr]
+-end [end]
+-exit [exit]
+-help [help]
+-locate
+-aeroscout
+-enable [locate (aeroscout|ekahau) (interval <5-3600>|enable)]
+-interval
+-<5-3600> [locate (aeroscout|ekahau) (interval <5-3600>|enable)]
+-wireless-client
+-AA-BB-CC-DD-EE-FF
+-enable [locate wireless-client (AA-BB-CC-DD-EE-FF|) enable]
+-enable [locate wireless-client (AA-BB-CC-DD-EE-FF|) enable]
+-interval
+-<5-3600> [locate wireless-client interval <5-3600>]
+-ekahau
+-enable [locate (aeroscout|ekahau) (interval <5-3600>|enable)]
+-interval..........................
RFController(config-rtls-sole)#