Brocade Communications Systems RFS6000 - Manual (Page 418)

416 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Interface config commands
12
management
Interface config commands
Sets the selected interface as management interface. It can only be used on a VLANx interface.
The TFTP/FTP server providing the controller its config file at startup must be accessible via this
interface.
VLAN 1 is the default management interface for the controller.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
management
Parameters
None
Usage Guidelines
The management privilege can be set only on a L3 interface. Use this command along with the
(config) management secure
in the config mode. This ensure management access is restricted
to the management VLAN only
Refer to management on page 268 for
management
configuration.
Example
RFController(config)#interface vlan 1000
RFController(config-if)#management
RFController(config-if)#