Service – Brocade Communications Systems RFS6000 User Manual
Page 39

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
37
53-1001931-01
Common commands
2
service
Service commands are used to manage the controller configuration in all modes. Depending on the
mode, different service commands will display.
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax(User Executable Mode)
service
[clear|diag|encrypt|kill|locator|save-cli|show|undefine|
wireless]
service
[locator|save-cli|undefine]
service clear
[command-history|reboot-history|upgrade-history]
service diag
[enable|identify|limit|period|poe
tech-support-period|tech-support-url]
service diag [enable|identify]
service diag poe debug
service diag limit
[buffer|fan|filesys|inodes|load|maxFDs|
pkbuffers|procRAM|ram|routecache|temperature]
service diag limit buffer
[
128|128k|16k|1k|256|2k|32|32k|4k|512|64|64k|8k] <0-65535>
service diag limit fan
<1-3> low <1000-15000>
service diag limit filesys [etc2|flash|var]
service diag limit inodes [etc2|flash|var]
service diag limit load [
01|05|15]
service diag limit maxFDs
<0-32767>
service diag limit pkbuffers
<0-65535>
service diag limit procRAM <0.0-100.0>
service diag limit ram <0.0-25.0>
service diag limit routecache
<0-65535>
service diag limit temperature
service diag period
<100-30000>
service diag tech-support-period
<10-10080>
service diag tech-support-url
service encrypt
secret 2
service kill
connection
{<1-64>}
service show
[cli|command-history|crash-info|diag|info|
memory|process|reboot-history|rtls|startup-log|
upgrade-history|watchdog]
service show [cli|command-history|crash-info|info|memory|
process|reboot-history|startup-log|upgrade-history|
watchdog]
service show diag
[hardware|led-status|limits|period|stats|
tech-support-period|tech-support-url|top]