Brocade Communications Systems RFS6000 - Manual (Page 40)

38 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Common commands
2
service show rtls [location-history|rfid]
service show rtls location-history
service show rtls rfid events reader {<1-48>}
service undefine ecspec {}
service wireless
Parameters(User Executable Mode)
clear [command-history|
reboot-history|
upgrade-history] Resets functions
•
command-history - Clears upgrade history
•
reboot-history - Clears reboot history
•
upgrade-history - Clears upgrade history
diag [enable|identify|limit|
period|poe
tech-support-period|
tech-support-url] Diagnostics commands
•
enable – Enables in-service diagnostics
•
identify – Identifies a controller by flashing its LEDs
•
limit [buffer|fan|filesys|inodes|load|maxFDs|
pkbuffers|procRAM|ram|routecache|temperature] – Sets
the diagnostic limit command
•
buffer []<0-65535> – Configures the buffer usage
warning limit. The warning limit can be set to a buffer
limit size [128|128k|16k|1k|256|2k|32|32k|4k|
512|64|64k|8k].
•
<0-65535>– Configures buffer usage warning
limit. Set between 0 and 65535.
•
fan <1 -3> low <1000-15000> – Sets the fan speed
limit for the fans on the controller.
•
low <1000-15000> – Sets the low speed limit of
the selected fan in RPMs.
•
filesys [etc2|flash|var] – Sets the file system freespace
limit
•
inodes[etc2|flash|var] – File system inode limit
•
load [01|05|15] – Aggregate processor load
•
maxFDs <0-32767> – Configures the maximum
number of file descriptors. Set between 0 to 32767
•
pkbuffers <0-65535> – Configures the packet buffer
head cache limit. Set between 0 and 65535.
•
procRAM <0-100.0> – Defines the RAM space used by
a process. Set the percentage of RAM space
used by the processor between 0.0 and 100.0 percent.
•
ram < 0.0-25.0 > – Configures free space for the RAM.
Configures the free space to any value between 0.0 to
25.0 percent.