Brocade Communications Systems RFS6000 - Manual (Page 182)

180 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Priv Exec command
4
cluster-cli
Priv Exec command
Use this command to access the cluster-cli context. The cluster-cli context provides centralized
management to configure all members of cluster from one member. Any command executed under
this context is executed on all controllers in the cluster.
A new context ( redundancy ) is available to support the cluster-cli. Any commands executed under
this context are executed on each cluster member.
Use
no cluster-cli
to exit the cluster-cli context.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
cluster-cli enable
Parameters
Example
RFController#cluster-cli enable
enable Enables the controller cluster context