Brocade Communications Systems RFS6000 - Manual (Page 471)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 469
53-1001931-01
Configuring IP Extended ACL
14
management Display L3 Managment Interface name
mobility Display Mobility parameters
ntp Network time protocol
password-encryption password encryption
port-channel Portchannel commands
privilege Show current privilege level
radius RADIUS configuration commands
redundancy Display redundancy group parameters
role Configure role parameters
rtls Real Time Locating System commands
running-config Current Operating configuration
securitymgr Securitymgr parameters
service-list List of services
sessions Display current active open connections
smtp-notifications Display SNMP engine parameters
snmp Display SNMP engine parameters
snmp-server Display SNMP engine parameters
spanning-tree Display spanning tree information
startup-config Contents of startup configuration
static-channel-group static channel group membership
terminal Display terminal configuration parameters
timezone Display timezone
traffic-shape Display traffic shaping
upgrade-status Display last image upgrade status
users Display information about currently logged
in users
version Display software & hardware version
virtual-ip IP redundancy feature
wireless Wireless configuration commands
wlan-acl wlan based acl
wwan Wireless wan interface
RFController(config-ext-nacl)#show
Configuring IP Extended ACL
IP Extended ACLs contain rules based on the following parameters:
• Source IP address
• Destination IP address
• IP Protocol
• Source Port–if protocol is TCP or UDP
• Destination Port–if protocol is TCP or UDP
• ICMP Type–if protocol is ICMP
• ICMP Code–if protocol is ICMP
IP protocol, Source IP and Destination IP are mandatory parameters.You can create either a
Numbered IP Extended ACL or a Named IP Extended IP Address.
Execute the following commands to configure an IP Extended ACL: