Brocade Communications Systems RFS6000 - Manual (Page 688)

686 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
•
second-key [enable|key|phrase] – Configures a secondary
set of key/passphrase for this WLAN.
•
enable – Enables the use of a secondary
key/passphrase.
•
key [0 |2 |] –
Configures the key (PMK).
•
phrase [0 |2 |]
– Configures the passphrase.
•
0 – Password is specified as unencrypted.
•
2 – Password is encrypted with
password-encryption secret.
•
– Sets the 256bit (64 hex characters) key.
•
tkip-cntrmeas-hold-time <0-65535> – Configures the
hold-time (in seconds) that clients are blocked when TKIP
counter measures are invoked. Default is 60 seconds.
•
wpa2-tkip enable – Enables support for WPA2-TKIP (in
addition to WPA-TKIP) when TKIP is enabled on this WLAN.
enable Enables specified WLAN(s).
encryption-type
[ccmp|keyguard|
none|tkip|tkip-ccmp|
wep128|wep64|
web128-keyguard] Sets the encryption type for this WLAN. Options include:
•
ccmp – AES Counter Mode CBC-MAC Protocol
(AES-CCM CCMP).
•
keyguard – Keyguard-MCM (Mobile Computing Mode).
•
none – No encryption.
•
tkip – Enables Temporal Key Integrity Protocol (TKIP).
•
tkip-ccmp – Enables both TKIP and CCMP on this WLAN.
•
wep128 – Enables Wired Equivalence Privacy (WEP) with
128 bit keys.
•
wep128-keyguard – Enables WEP128 as well as
Keyguard-MCM on this WLAN.
•
wep64 – Enables Wired Equivalence Privacy (WEP) with 64
bit keys.
NOTE: A WEP64 configuration is insecure when two WLANs are
mapped to the same VLAN, and one uses no encryption
and the other uses WEP.
hold-time <1-300> Specifies the time duration in seconds to hold user credentials
when a Client leaves or roams out.