Brocade Communications Systems RFS6000 - Manual (Page 811)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 809
53-1001931-01
Role config commands
26
client-mac
Role config commands
Configures the Client MAC addresses for role based firewall
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
client-mac [|/|any]
Parameters
Example
RFController(config-role)#client-mac aa:bb:cc:dd:ee:ff
RFController(config-role)#
The address of the Client that is allowed. MAC address can be in
the format AA:BB:CC:DD:EE:FF or AA-BB-CC-DD-EE-FF or
AABB.CCDD.EEFF.
/ The address and mask combination for the Client to be allowed.
and should be in the format
AA:BB:CC:DD:EE:FF or AA-BB-CC-DD-EE-FF or AABB.CCDD.EEFF
any Match with any MAC address.