Brocade Communications Systems RFS6000 User Manual
Page 533
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
531
53-1001931-01
DHCP Config commands
17
no
Negates a command or sets its defaults
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
no [address|bootfile|class|client-identifier|client-name|
ddns|default-router|dns-server|domain-name|hardware-address|
host|lease|netbios-name-server|netbios-node-type|network|
next-server|option|update|unicast-table]
Parameters
The
no
command negates any command associated with it. Wherever required, use the same
parameters associated with the command getting negated.
Example
RFController(config)#no ip dhcp pool hotpool
RFController(config)#
RFController(config)#no ip dhcp pool test
RFController(config)#
RFController(config-dhcp)#no update dns
RFController(config-dhcp)#