Brocade Communications Systems RFS6000 - Manual (Page 232)

230 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
bridge
Global Configuration commands
Configures bridge specific commands
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
NOTE
The interfaces mentioned below are supported in the following platforms:
- ge – Mobility RFS4000 Controller and Mobility RFS4000 Controller support 4 GEs and
Mobility RFS6000 Controller supports 8 GEs
- sa <1-4> – Supported on Mobility RFS7000 Controller
- sa <1-6> – Supported on Mobility RFS4000 Controller
- me1 – Only supported on Mobility RFS6000 Controller and Mobility RFS6000 Controller
- up1 – Only supported on Mobility RFS6000 Controller and Mobility RFS4000 Controller
Syntax
{no} bridge [|multiple-spanning-tree]
bridge [address|ageing-time]
bridge address [discard|forward] [|ge
<1-8>|me1|sa <1-4>|up1|vlan <1-4094>]
bridge ageing-time [0|<10-1000000>]
bridge multiple-spanning-tree enable