Ap-image – Brocade Communications Systems RFS6000 User Manual
Page 606
604
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
ap-image
Wireless configuration commands
Defines the path to upload the new image over an AP
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
ap-image [br300-ids-sensor|br300-wisp|br300-wispe|br650-wispe|
br7131]
Parameters
Example
RFController (config-wireless)#ap-image br7131 flash:/aap_10B.bin
RFController (config-wireless)#
[br300-ids-sensor|
br300-wisp|
br300-wispe|
br300-wispe|
|br7131]
The interface to upload new AP image. The following APs are
supported:
•
br300-ids-sensor – IDS Sensor firmware for BR300
•
br300-wisp – WISP image for BR300
•
br300-wispe – WISPe image for BR300
•
br650-wispe – WISPe image for BR650
•
br7131 – Adaptive AP image for BR7131
•